Camotool - User contributions [en]

PDF Manager

2021-12-21T10:02:17Z

Imartin:

PDF Manager is a tool that allows us to modify existing PDF files, splitting one into several files, joining several PDFs and images in the same PDF file or transforming images into PDF files

These files can be downloaded on your computer or uploaded to Camotool as form1.

Acces through the button on the right parte of the upper menu.

[[File:PDFManagerButton.png|RTENOTITLE]]

 

== '''PDF Manager Dialog''' ==

 

[[File:PDFManagerDialog.png|1000px|PDFManagerDialog.png]]

 

#'''Split selected:''' Opens a dialog to split the selected PDF file into one or more PDF files.
#'''Join selected: '''Opens a dialog to join any number of PDF or image files into one PDF file.
#'''Transform image: '''Transforms the selected image into a PDF file. Image will always take the maximum space posible in the A4 format of the PDF file.
#'''Select all: '''Selects all the files in the list.
#'''Remove All: '''Removes all the files in the list.
#'''Add file: '''Opens the browser file picket to add one file into the list. Files can also be added by dragging them into the list.
#'''Added files list: '''List of the added files. Realized actions are noted under the file name.
#'''Edit file name: '''Rename the file.
#'''Remove file: '''Removes the file from the list.
#'''Upload as Form1: '''Upload the selected files to Camotool as form1. Button is disabled if the user doesn't have form1 create permission.
#'''Download selection: '''Download the selected files to your computer.
#'''Processed files: '''List of the processed files. It shows a pending state when they are not uploaded to the server. After uploading state changes to complete or error. If succeds the file is rename with the form1 id before it actual name,
#'''Processed file name: '''Name of the processed file. If clicked a PDF Viewer dialog will open, to previsualize it. File can be downloaded from the viewer too.
#'''Close: '''Closes the PDF Manager tool.

 

== '''PDF Manager Page Selection Dialog''' ==

 

'''[[File:PDFManagerGridDialog.png|1000px|PDFManagerGridDialog.png]]'''

 

#'''Select All/Unselect All: '''Selects all the pages or unselects if pressed again. If any pages were selected before pressing it, they will remain before in the created file.
#'''PDF Page: '''Each page of the PDF documents or images to be processed. When selected, a number will appear at the top, indicating the selection order for the document creation. When a document is created through "''Split selected''" button, pages are highlighted in differents colours to keep tracking in case you want to create multiple PDF files.
#'''Created PDF file: '''When documents are create through "''Split selected''" button, a message toast appears when a new document is created.
#'''Create: '''Creates a new PDF file. When created through "''Join selected", ''dialog will close. When created through "''Split selected"'' dialog will remain to be able to create multiple documents. 
#'''Close: '''Closes the page selection dialog.

 

== '''Split Selected PDF''' ==

To split a PDF into one or multiple PDF files add the pdf file to the file list. (One PDF file is accepted)

Select the file and press "''Split selected''" button.

Select any number of pages in the desired order and press "''Create''".

A pop message will appear as confirmation with the created file name. Selected pages will be highligthed to keep track of the already processed ones.

You can keep selecting pages to create another PDF document or close the page selection dialog.

== '''Join Selected PDF''' ==

[[File:PDFManagerJoin.png|400px|PDFManagerJoin.png]]

To join one or multiple PDF and/or image files into one PDF file, add the files to the file list. (One or more files accepted, formats accepted are PDF, JPEG and PNG)

Select the files and press "''Join selected''" button.

Select any number of pages in the desired order and press "''Create''".

Pages selection dialog will close and the document will be added to the processed files list as "new_doc.pdf". Rename can be done pressing edit button on the right side of the item.

 

== '''Transform Image to PDF''' ==

Transform image to pdf can also be done by "''Join selected''" option, in case you need multiple images into the same pdf.

To transform one or multiple images into PDF files, add the files to the file list. (One or more files accepted, formats accepted are JPEG and PNG)

Select the files and press "''Transform image''" button.

Images will be processed and will appear in the processed list as PDF files.

[[File:PDFManagerTransform.png|1000px|PDFManagerTransform.png]]

 

== '''Download Selection''' ==

Once you have your processed PDF files, you can download it to your computer easily.

Select one or more files that you want to download, and press the "''Download selection''" button. 

Files will be downloaded on your browser predefined download path.

 

== '''Upload PDF as Form1''' ==

Processed files can be uploaded to the server as Form1. You can also drag a PDF file from your computer to the processed list and upload it directly.

To upload the files, select the files and press "''Upload as Form1''" button.

Uploaded files will change their status from pending to Upload Completed in case of success, or Error in case of failure.

The file name will change, adding the form one id number at the start, and a description will appear on the item, with the same id.

[[File:PDFManagerItemUploaded.png|RTENOTITLE]]

 

== '''PDF Manager Viewer''' ==

When a processed file name is clicked, a PDF Viewer dialog will pop-up.

Options are the same as any PDF web viewer, you can zoom, rotate, print or download the document.

'''[[File:PDFManagerViewer.png|1000px|PDFManagerViewer.png]]'''

PDF Manager

2021-12-21T10:01:24Z

Imartin:

PDF Manager is a tool that allows us to modify existing PDF files, splitting one into several files, joining several PDFs and images in the same PDF file or transforming images into PDF files

These files can be downloaded on your computer or uploaded to Camotool as form1.

Acces through the button on the right parte of the upper menu. [[File:PDFManagerButton.png|RTENOTITLE]]

 

== '''PDF Manager Dialog''' ==

 

[[File:PDFManagerDialog.png|1000px|PDFManagerDialog.png]]

 

#'''Split selected:''' Opens a dialog to split the selected PDF file into one or more PDF files.
#'''Join selected: '''Opens a dialog to join any number of PDF or image files into one PDF file.
#'''Transform image: '''Transforms the selected image into a PDF file. Image will always take the maximum space posible in the A4 format of the PDF file.
#'''Select all: '''Selects all the files in the list.
#'''Remove All: '''Removes all the files in the list.
#'''Add file: '''Opens the browser file picket to add one file into the list. Files can also be added by dragging them into the list.
#'''Added files list: '''List of the added files. Realized actions are noted under the file name.
#'''Edit file name: '''Rename the file.
#'''Remove file: '''Removes the file from the list.
#'''Upload as Form1: '''Upload the selected files to Camotool as form1. Button is disabled if the user doesn't have form1 create permission.
#'''Download selection: '''Download the selected files to your computer.
#'''Processed files: '''List of the processed files. It shows a pending state when they are not uploaded to the server. After uploading state changes to complete or error. If succeds the file is rename with the form1 id before it actual name,
#'''Processed file name: '''Name of the processed file. If clicked a PDF Viewer dialog will open, to previsualize it. File can be downloaded from the viewer too.
#'''Close: '''Closes the PDF Manager tool.

 

== '''PDF Manager Page Selection Dialog''' ==

 

'''[[File:PDFManagerGridDialog.png|1000px|PDFManagerGridDialog.png]]'''

 

#'''Select All/Unselect All: '''Selects all the pages or unselects if pressed again. If any pages were selected before pressing it, they will remain before in the created file.
#'''PDF Page: '''Each page of the PDF documents or images to be processed. When selected, a number will appear at the top, indicating the selection order for the document creation. When a document is created through "''Split selected''" button, pages are highlighted in differents colours to keep tracking in case you want to create multiple PDF files.
#'''Created PDF file: '''When documents are create through "''Split selected''" button, a message toast appears when a new document is created.
#'''Create: '''Creates a new PDF file. When created through "''Join selected", ''dialog will close. When created through "''Split selected"'' dialog will remain to be able to create multiple documents. 
#'''Close: '''Closes the page selection dialog.

 

== '''Split Selected PDF''' ==

To split a PDF into one or multiple PDF files add the pdf file to the file list. (One PDF file is accepted)

Select the file and press "''Split selected''" button.

Select any number of pages in the desired order and press "''Create''".

A pop message will appear as confirmation with the created file name. Selected pages will be highligthed to keep track of the already processed ones.

You can keep selecting pages to create another PDF document or close the page selection dialog.

== '''Join Selected PDF''' ==

[[File:PDFManagerJoin.png|400px|PDFManagerJoin.png]]

To join one or multiple PDF and/or image files into one PDF file, add the files to the file list. (One or more files accepted, formats accepted are PDF, JPEG and PNG)

Select the files and press "''Join selected''" button.

Select any number of pages in the desired order and press "''Create''".

Pages selection dialog will close and the document will be added to the processed files list as "new_doc.pdf". Rename can be done pressing edit button on the right side of the item.

 

== '''Transform Image to PDF''' ==

Transform image to pdf can also be done by "''Join selected''" option, in case you need multiple images into the same pdf.

To transform one or multiple images into PDF files, add the files to the file list. (One or more files accepted, formats accepted are JPEG and PNG)

Select the files and press "''Transform image''" button.

Images will be processed and will appear in the processed list as PDF files.

[[File:PDFManagerTransform.png|1000px|PDFManagerTransform.png]]

 

== '''Download Selection''' ==

Once you have your processed PDF files, you can download it to your computer easily.

Select one or more files that you want to download, and press the "''Download selection''" button. 

Files will be downloaded on your browser predefined download path.

 

== '''Upload PDF as Form1''' ==

Processed files can be uploaded to the server as Form1. You can also drag a PDF file from your computer to the processed list and upload it directly.

To upload the files, select the files and press "''Upload as Form1''" button.

Uploaded files will change their status from pending to Upload Completed in case of success, or Error in case of failure.

The file name will change, adding the form one id number at the start, and a description will appear on the item, with the same id.

[[File:PDFManagerItemUploaded.png]]

 

== '''PDF Manager Viewer''' ==

When a processed file name is clicked, a PDF Viewer dialog will pop-up.

Options are the same as any PDF web viewer, you can zoom, rotate, print or download the document.

'''[[File:PDFManagerViewer.png|1000px|PDFManagerViewer.png]]'''

File:PDFManagerItemUploaded.png

2021-12-21T09:28:25Z

Imartin: Imartin uploaded a new version of File:PDFManagerItemUploaded.png

File:PDFManagerItemUploaded.png

2021-12-21T09:26:03Z

Imartin:

PDF Manager

2021-12-20T16:47:33Z

Imartin: Created page with " PDF Manager is a tool that allows us to modify existing PDF files, splitting one into several files, joining several PDFs and images in the same PDF file or transfo..."

PDF Manager is a tool that allows us to modify existing PDF files, splitting one into several files, joining several PDFs and images in the same PDF file or transforming images into PDF files

These files can be downloaded on your computer or uploaded to Camotool as form1.

Acces through the button on the right parte of the upper menu. [[File:PDFManagerButton.png|RTENOTITLE]]

 

== '''PDF Manager Dialog''' ==

[[File:PDFManagerDialog.png|1000px|PDFManagerDialog.png]]

#'''Split selected:''' Opens a dialog to split the selected PDF file into one or more PDF files.
#'''Join selected: '''Opens a dialog to join any number of PDF or image files into one PDF file.
#'''Transform image: '''Transforms the selected image into a PDF file. Image will always take the maximum space posible in the A4 format of the PDF file.
#'''Select all: '''Selects all the files in the list.
#'''Remove All: '''Removes all the files in the list.
#'''Add file: '''Opens the browser file picket to add one file into the list. Files can also be added by dragging them into the list.
#'''Added files list: '''List of the added files. Realized actions are noted under the file name.
#'''Edit file name: '''Rename the file.
#'''Remove file: '''Removes the file from the list.
#'''Upload as Form1: '''Upload the selected files to Camotool as form1. Button is disabled if the user doesn't have form1 create permission.
#'''Download selection: '''Download the selected files to your computer.
#'''Processed files: '''List of the processed files. It shows a pending state when they are not uploaded to the server. After uploading state changes to complete or error. If succeds the file is rename with the form1 id before it actual name,
#'''Processed file name: '''Name of the processed file.
#'''Close: '''Closes the PDF Manager tool.

 

 

 

== '''PDF Manager Page Selection Dialog''' ==

'''[[File:PDFManagerGridDialog.png|1000px|PDFManagerGridDialog.png]]'''

#'''Select All/Unselect All: '''Selects all the pages or unselects if pressed again. If any pages were selected before pressing it, they will remain before in the created file.
#'''PDF Page: '''Each page of the PDF documents or images to be processed. When selected, a number will appear at the top, indicating the selection order for the document creation. When a document is created through "''Split selected''" button, pages are highlighted in differents colours to keep tracking in case you want to create multiple PDF files.
#'''Created PDF file: '''When documents are create through "''Split selected''" button, a message toast appears when a new document is created.
#'''Create: '''Creates a new PDF file. When created through "''Join selected", ''dialog will close. When created through "''Split selected"'' dialog will remain to be able to create multiple documents. 
#'''Close: '''Closes the page selection dialog.

== '''Split Selected PDF''' ==

To split a PDF into one or multiple PDF files add the pdf file to the file list. (One PDF file is accepted)

Select the file and press "''Split selected''" button.

Select any number of pages in the desired order and press "''Create''".

A pop message will appear as confirmation with the created file name. Selected pages will be highligthed to keep track of the already processed ones.

You can keep selecting pages to create another PDF document or close the page selection dialog.

== '''Join Selected PDF''' ==

[[File:PDFManagerJoin.png|400px|PDFManagerJoin.png]]

To join one or multiple PDF and/or image files into one PDF file, add the files to the file list. (One or more files accepted, formats accepted are PDF, JPEG and PNG)

Select the files and press "''Join selected''" button.

Select any number of pages in the desired order and press "''Create''".

Pages selection dialog will close and the document will be added to the processed files list as "new_doc.pdf". Rename can be done pressing edit button on the right side of the item.

 

== '''Transform Image to PDF''' ==

*Transform image to pdf can also be done by "''Join selected''" option, in case you need multiple images into the same pdf.

To transform one or multiple images into PDF files, add the files to the file list. (One or more files accepted, formats accepted are JPEG and PNG)

Select the files and press "''Transform image''" button.

Images will be processed and will appear in the processed list as PDF files.

[[File:PDFManagerTransform.png|1000px|PDFManagerTransform.png]]

 

== '''Download Selection''' ==

 

== '''Upload PDF as Form1''' ==

 

== '''PDF Manager Viewer''' ==

'''[[File:PDFManagerViewer.png|1000px|PDFManagerViewer.png]]'''

File:PDFManagerViewer.png

2021-12-20T16:45:28Z

Imartin:

File:PDFManagerTransform.png

2021-12-20T15:26:25Z

Imartin:

File:PDFManagerJoin.png

2021-12-20T15:26:17Z

Imartin:

File:PDFManagerDialog.png

2021-12-20T15:26:07Z

Imartin:

File:PDFManagerGridDialog.png

2021-12-20T15:25:28Z

Imartin:

File:PDFManagerButton.png

2021-12-20T14:19:48Z

Imartin:

Provider/Contact data/Web address

2020-10-02T08:05:46Z

Imartin:

= How to assign tracking web for a courier provider =

When creating or modifiying a courier provider we have the option to add a tracking web to have a direct link for the tracking number on the shipping order button.

In order to achieve this, when editing the '''Provider '''fields, on ''Contact data'' -> ''Web address'' we have to write an additional web url with the following format:www.testweb.com | testformattrackingweb.com/search=?#tracking#=now00. 

The separation betwen the two url must be exactly " | " in order to work, #tracking# is where the tracking number should be.

A real example using the world known company UPS:

The actual homepage of this provider is www.ups.com.

The page for searching the tracking number 1Z7W41130446837436 would be 
<pre>http://wwwapps.ups.com/WebTracking/processInputRequest?TypeOfInquiryNumber=T&InquiryNumber1=1Z7W41130446837436</pre>

So, our Web address field would be the following:

www.ups.com | wwwapps.ups.com/WebTracking/processInputRequest?TypeOfInquiryNumber=T&InquiryNumber1=#tracking#

[[File:Trackingweb.png|RTENOTITLE]]

Note that the tracking number has been replaced for #tracking#.

 

=== '''Example video''' ===

[[File:AssignWebProvider.mp4|854x480px|Media:AssignWebProvider.mp4]]

[[Category:Provider]]

Provider/Contact data/Web address

2020-09-29T15:52:39Z

Imartin:

= How to assign tracking web for a courier provider =

When creating or modifiying a courier provider we have the option to add a tracking web to have a direct link for the tracking number on the shipping order button.

In order to achieve this, when editing the '''Provider '''fields, on ''Contact data'' -> ''Web address'' we have to write an additional web url with the following format:www.testweb.com | testformattrackingweb.com/search=?#tracking#=now00. 

The separation betwen the two url must be exactly " | " in order to work, #tracking# is where the tracking number should be.

A real example using the world known company UPS:

The actual homepage of this provider is www.ups.com.

The page for searching the tracking number 1Z7W41130446837436 would be 
<pre>http://wwwapps.ups.com/WebTracking/processInputRequest?TypeOfInquiryNumber=T&InquiryNumber1=1Z7W41130446837436</pre>

So, our Web address field would be the following:

www.ups.com | wwwapps.ups.com/WebTracking/processInputRequest?TypeOfInquiryNumber=T&InquiryNumber1=#tracking#

[[File:Trackingweb.png|RTENOTITLE]]

Note that the tracking number has been replaced for #tracking#.

 

=== '''Example video''' ===

[[Media:AssignWebProvider.mp4|'''Media:AssignWebProvider.mp4''']]

[[Category:Provider]]

File:AssignWebProvider.mp4

2020-09-29T15:47:59Z

Imartin:

Provider/Contact data

2020-09-28T15:58:53Z

Imartin:

== [[Provider/Contact_data/Web_address|Web address]] ==

Provider

2020-09-28T15:58:08Z

Imartin:

We acces the provider page through ''Bussiness management'' button on the main page.  

 

== '''Provider Information''' ==

(Work in progress...)

 

== '''General Information''' ==

(Work in progress...)

 

== [[Provider/Contact_data|'''Contact data''']] ==

(Work in progress...)

 

 

[[Category:Provider]]

Provider/Contact data/Web address

2020-09-28T15:51:52Z

Imartin:

= How to assign tracking web for a courier provider =

When creating or modifiying a courier provider we have the option to add a tracking web to have a direct link for the tracking number on the shipping order button.

In order to achieve this, when editing the '''Provider '''fields, on ''Contact data'' -> ''Web address'' we have to write an additional web url with the following format:www.testweb.com | testformattrackingweb.com/search=?#tracking#=now00. 

The separation betwen the two url must be exactly " | " in order to work, #tracking# is where the tracking number should be.

A real example using the world known company UPS:

The actual homepage of this provider is www.ups.com.

The page for searching the tracking number 1Z7W41130446837436 would be 
<pre>http://wwwapps.ups.com/WebTracking/processInputRequest?TypeOfInquiryNumber=T&InquiryNumber1=1Z7W41130446837436</pre>

So, our Web address field would be the following:

www.ups.com | wwwapps.ups.com/WebTracking/processInputRequest?TypeOfInquiryNumber=T&InquiryNumber1=#tracking#

[[File:Trackingweb.png|RTENOTITLE]]

Note that the tracking number has been replaced for #tracking#.

 

[[Category:Provider]]

Provider/Contact data/Web address

2020-09-28T15:51:38Z

Imartin:

= How to assign tracking web for a courier provider =

When creating or modifiying a courier provider we have the option to add a tracking web to have a direct link for the tracking number on the shipping order button.

In order to achieve this, when editing the '''Provider '''fields, on ''Contact data'' -> ''Web address'' we have to write an additional web url with the following format:www.testweb.com | testformattrackingweb.com/search=?#tracking#=now00. 

The separation betwen the two url must be exactly " | " in order to work, and #tracking# is where the tracking number should be.

A real example using the world known company UPS:

The actual homepage of this provider is www.ups.com.

The page for searching the tracking number 1Z7W41130446837436 would be 
<pre>http://wwwapps.ups.com/WebTracking/processInputRequest?TypeOfInquiryNumber=T&InquiryNumber1=1Z7W41130446837436</pre>

So, our Web address field would be the following:

www.ups.com | wwwapps.ups.com/WebTracking/processInputRequest?TypeOfInquiryNumber=T&InquiryNumber1=#tracking#

[[File:Trackingweb.png|RTENOTITLE]]

Note that the tracking number has been replaced for #tracking#.

 

[[Category:Provider]]

Provider/Contact data/Web address

2020-09-28T15:51:07Z

Imartin:

= How to assign tracking web for a courier provider =

When creating or modifiying a courier provider we have the option to add a tracking web to have a direct link for the tracking number on the shipping order button.

In order to achieve this, when editing the '''Provider '''fields, on ''Contact data'' -> ''Web address'' we have to write an additional web url with the following format:www.testweb.com | testformattrackingweb.com/search=?#tracking#=now00. 

The separation betwen the two url must be exactly " | " in order to work #tracking# is where the tracking number should be.

A real example using the world known company UPS:

The actual homepage of this provider is www.ups.com.

The page for searching the tracking number 1Z7W41130446837436 would be 
<pre>http://wwwapps.ups.com/WebTracking/processInputRequest?TypeOfInquiryNumber=T&InquiryNumber1=1Z7W41130446837436</pre>

So, our Web address field would be the following:

www.ups.com | wwwapps.ups.com/WebTracking/processInputRequest?TypeOfInquiryNumber=T&InquiryNumber1=#tracking#

[[File:Trackingweb.png|RTENOTITLE]]

Note that the tracking number has been replaced for #tracking#.

 

[[Category:Provider]]

Provider/Contact data/Web address

2020-09-28T15:46:16Z

Imartin:

= How to assign tracking web for a courier provider =

When creating or modifiying a courier provider we have the option to add a tracking web to have a direct link for the tracking number on the shipping order button.

In order to achieve this, when editing the '''Provider '''fields, on ''Contact data'' -> ''Web address'' we have to write an additional web url with the following format:www.testweb.com | testformattrackingweb.com/search=?#tracking#=now00. 

The separation betwen the two url must be exactly " | " in order to work.#tracking# is where the tracking number should be.

A real example using the world known company UPS:

The actual homepage of this provider is www.ups.com.

The page for searching the tracking number 1Z7W41130446837436 would be 
<pre>http://wwwapps.ups.com/WebTracking/processInputRequest?TypeOfInquiryNumber=T&InquiryNumber1=1Z7W41130446837436</pre>

So, our Web address field would be the following:

www.ups.com | wwwapps.ups.com/WebTracking/processInputRequest?TypeOfInquiryNumber=T&InquiryNumber1=#tracking#

[[File:Trackingweb.png]]

Note that the tracking number has been replaced for #tracking#.

 

[[Category:Provider]]

File:Trackingweb.png

2020-09-28T15:45:38Z

Imartin:

Provider/Contact data/Web address

2020-09-28T15:41:19Z

Imartin:

= How to assign tracking web for a courier provider =

When creating or modifiying a courier provider we have the option to add a tracking web to have a direct link for the tracking number on the shipping order button.

In order to achieve this, when editing the '''Provider '''fields, on ''Contact data'' -> ''Web address'' we have to write an additional web url with the following format:www.testweb.com | testformattrackingweb.com/search=?#tracking#=now00. 

The separation betwen the two url must be exactly " | " in order to work.#tracking# is where the tracking number should be.

A real example using the world known company UPS:

The actual homepage of this provider is www.ups.com.

The page for searching the tracking number 1Z7W41130446837436 would be 
<pre>http://wwwapps.ups.com/WebTracking/processInputRequest?TypeOfInquiryNumber=T&InquiryNumber1=1Z7W41130446837436</pre>

So, our Web address field would be the following:

www.ups.com | wwwapps.ups.com/WebTracking/processInputRequest?TypeOfInquiryNumber=T&InquiryNumber1=#tracking#

Note that the tracking number has been replaced for #tracking#.

 

[[Category:Provider]]

Provider/Contact data/Web address

2020-09-28T15:40:00Z

Imartin:

= How to assign tracking web for a courier provider =

When creating or modifiying a courier provider we have the option to add a tracking web to have a direct link for the tracking number on the shipping order button.

In order to achieve this, when editing the provider form, on ''Contact data'' -> ''Web address'' we have to write an additional web url with the following format:www.testweb.com | testformattrackingweb.com/search=?#tracking#=now00. 

The separation betwen the two url must be exactly " | " in order to work.#tracking# is where the tracking number should be.

A real example using the world known company UPS:

The actual homepage of this provider is www.ups.com.

The page for searching the tracking number 1Z7W41130446837436 would be 
<pre>http://wwwapps.ups.com/WebTracking/processInputRequest?TypeOfInquiryNumber=T&InquiryNumber1=1Z7W41130446837436</pre>

So, our Web address field would be the following:

www.ups.com | wwwapps.ups.com/WebTracking/processInputRequest?TypeOfInquiryNumber=T&InquiryNumber1=#tracking#

Note that the tracking number has been replaced for #tracking#.

 

[[Category:Provider]]

Provider/Contact data

2020-09-28T15:01:49Z

Imartin: Created page with " "

Provider/Contact data/Web address

2020-09-24T15:54:19Z

Imartin:

= How to assign tracking web for a courier provider =

When we creating or modifiying a courier provider we have the option to add a tracking web to have a direct link for the tracking number on the shipping order button.

In order to achieve this, when editing the provider form, on ''Contact data'' -> ''Web address'' we have to write an additional web url with the following format:www.testweb.com | testformattrackingweb.com/search=?#tracking#=now00. 

The separation betwen the two url must be exactly " | " in order to work.#tracking# is where the tracking number should be.

A real example using the world known company UPS:

The actual homepage of this provider is www.ups.com.

The page for searching the tracking number 1Z7W41130446837436 would be 
<pre>http://wwwapps.ups.com/WebTracking/processInputRequest?TypeOfInquiryNumber=T&InquiryNumber1=1Z7W41130446837436</pre>

So, our Web address field would be the following:

www.ups.com | wwwapps.ups.com/WebTracking/processInputRequest?TypeOfInquiryNumber=T&InquiryNumber1=#tracking#

Note that the following number has been substituted for #tracking#.

 

[[Category:Provider]]

Provider/Contact data/Web address

2020-09-24T15:53:32Z

Imartin: Created page with " = How to assign tracking web for a courier provider = When we creating or modifiying a courier provider we have the option to add a tracking web to have a direct link for th..."

Provider

2020-09-24T15:23:40Z

Imartin:

We acces the provider page through ''Bussiness management'' button on the main page.  

 

== '''Provider Information''' ==

(Work in progress...)

 

== '''General Information''' ==

(Work in progress...)

 

== '''Contact data''' ==

(Work in progress...)

 

 

[[Category:Provider]]

Provider

2020-09-24T15:23:00Z

Imartin: Created page with "We acces the provider page through ''Bussiness management'' button on the main page.   == '''Provider Information''' == (Work in progress...)  ..."

We acces the provider page through ''Bussiness management'' button on the main page.  
== '''Provider Information''' ==

(Work in progress...)

 

== '''General Information''' ==

(Work in progress...)

 

== '''Contact data''' ==

(Work in progress...)

 

 

[[Category:Provider]]

Shipping Order

2020-09-24T15:13:22Z

Imartin:

== '''Shipping Order Toolbar''' ==

Buttons on the shipping Order Toolbar:

*'''Print Address:''' Automatically generates a ''.docx'' document for the shipping label. On click it will ask to the attention of whom it is addressed.
*'''Edit:'''
*'''Save changes:'''
*'''Delete:'''
*'''Open in new window:'''
*'''Add materials:'''

== '''Shipping Order Information''' ==

(Work in progress...)

== '''Shipping Data''' ==

Shipping Data fields:

*'''Purchase Order:''' Purchase Order related to this shipping order.
*'''Courier: '''Courier selected for this shipping. Button opens the assigned web for this courier provider.
*'''Courier Service: '''Type of service from this courier for this shipping.
*'''Tracking Number: '''Tracking number given by the courier for this shipping. Button opens the tracking number link if tracking number web is assigned.
*'''Courier Invoice Number:''' Courier invoice number for this shipping.
*'''Delivery Note Number: '''Delivery note for this shipping.
*'''Provider: '''Provider for this shipping.
*'''Customer: '''Customer for this shipping.

== '''Shipping Address''' ==

The default Shipping Address will be the selected customer address. We can change that address to another existent one or create a new address. 

Shipping Address fields:

*'''Address:''' Address from the receiver.
*'''City: '''City from the receiver.
*'''Zip code: '''Zip code from the receiver.
*'''Country: '''Country form the receiver.
*'''State: '''State from the receiver.

Shipping Address Buttons:

*'''Change:''' Allow us to change the Address for the shipping order.
*'''New: '''Allow us to create a new Address.

[[File:Shippingorder address.png|upright|Shippingorder address.png]]

 

=== '''Change shipping order address''' ===

To change the shipping order address, click on the ''Change'' button. This will open a dialog with the list of saved addresses. We can select an address from the list or search for an addres using the search bar.

[[File:Shippingorderchangeaddresdialog.png|upright|Shippingorderchangeaddresdialog.png]]

 

=== '''New shipping order address''' ===

To create a new shipping order address, click on the ''New'' button. It will open an ''Add new Address'' dialog. Once we fill all the new address fields, click on the ''Add ''button to save the new address on our address list. To assign the new address to the shipping order, we have click on ''Change'' and select it from our address list.'''[[File:Shippingordernewaddress.png|upright|Shippingordernewaddress.png]]'''

== '''Pricing''' ==

(Work in progress...)

== '''Misc.''' ==

(Work in progress...)

 

[[Category:Shipping Order]]

Model inspection type

2020-08-05T09:38:04Z

Imartin:

We access the '''Model Inspection type''' section through the''Camo'' button on our main page.

 

On the left we have a list with the model inspection type from our database. In the right section we see the detailed content of the selected model inspection type.

Model inspection type fields are:

*'''ID: '''Model inspection type identification automatically generated at creation.
*'''Name: '''Model inspection type name.
*'''Grouping:''' Model inspection type group on reports.

 

== '''Create a new Model inspection type''' ==

To create a new Model inspection type press the ''Add ''button.

[[File:Ramit 1.png|600px|Ramit 1.png]]

 

Then we press the ''Edit ''button.

[[File:Ramit 2.png|600px|Ramit 2.png]]

 

Fields will be enabled to fill the new entry. The ID field will be automatically generated for us when a new entry is saved.

To save a new entry, click on the ''Save Changes'' button.

[[File:Ramit 3.png|600px|Ramit 3.png]]

 

We get a new confirmation dialog asking us if we want to create a new Model inspection type. We click OK.

[[File:Ramit 4.png|RTENOTITLE]]

 

== '''Remove a Model inspection type''' ==

To Remove a Model inspection type from our list, select the Model inspection type and click on the ''Delete ''button.

[[File:Ramit 5.png|600px|Ramit 5.png]]

We will get a dialog asking if we are sure we want to remove that Model inspection type and all the associated information. Press ''OK ''to confirm.

[[File:Ramit 6.png|600px|Ramit 6.png]]

 

 

== '''Search a Model inspection type''' ==

The search for a Model inspection type can be done using any field in it. Within the Model inspection types page, we go to the Search space, and left click on it. We directly write any word contained in any of the Model inspection type fields that we want to search for, and click on the ''Search ''icon or press the ''Enter key'' directly. Then the results that match the search criteria will be shown.

[[File:Ramit 7.png|RTENOTITLE]]

 

If we want to set our list back to the original state, left click on the reset icon.

[[File:Ramit 8.png|RTENOTITLE]]

 

 

== '''Edit a Model inspection type''' ==

To edit a Model inspection type, we select a Model inspection type from our list, and click the ''Edit ''button.

[[File:Ramit 9.png|600px|Ramit 9.png]]

 

 

Once the changes are done, we click on the Save changes button.

[[File:Ramit 10.png|600px|Ramit 10.png]]

 

A popup dialog will appear asking us if we want to save all the changes, press OK. The server will confirm if the changes have been saved correctly.

[[File:Ramit 11.png|RTENOTITLE]]

 

 

 

== '''Model inspection type display modes''' ==

=== '''Fullscreen''' ===

To access the fullscreen view of a Model inspection type, click on the button in the upper right corner ''Enter full screen mode''.

[[File:Ramit 12.png|600px|Ramit 12.png]]

 

To exit this fullscreen view mode, click on the ''Exit Full Screen Mode ''button.

[[File:Ramit 13.png|600px|Ramit 13.png]]

 

=== '''List View''' ===

If we want to see only the Model inspection type list without the information, we can close the information by clicking the ''Close column'' button.

[[File:Ramit 14.png|600px|Ramit 14.png]]

 

This will show us the list on fullscreen. To return to the previous mode, click one of the Model inspection type to see its detailed information.

[[File:Ramit 15.png|600px|Ramit 15.png]]

 

== '''Model inspection type tools''' ==

In the tools column, we will find an icon, which clicked will display the information option. By clicking here we will access the general information of that Model inspection type.

[[File:Ramit 16.png|RTENOTITLE]]

[[Category:Model inspection type]]

Model inspection type

2020-08-05T09:37:43Z

Imartin:

We access the '''Model Inspection type''' section through the''Camo'' button on our main page.

 

On the left we have a list with the model inspection type from our database. In the right section we see the detailed content of the selected model inspection type.

Model inspection type fields are:

*'''ID: '''Model inspection type identification automatically generated at creation.
*'''Name: '''Model inspection type name.
*'''Grouping:''' Model inspection type group on reports.

 

== '''Create a new Model inspection type''' ==

To create a new Model inspection type press the ''Add ''button.

[[File:Ramit 1.png|600px|Ramit 1.png]]

 

Then we press the ''Edit ''button.

[[File:Ramit 2.png|600px|Ramit 2.png]]

 

Fields will be enabled to fill the new entry. The ID field will be automatically generated for us when a new entry is saved.

To save a new entry, click on the ''Save Changes'' button.

[[File:Ramit 3.png|600px|Ramit 3.png]]

 

We get a new confirmation dialog asking us if we want to create a new Model inspection type. We click OK.

[[File:Ramit 4.png|RTENOTITLE]]

 

== '''Remove a ''''''Model inspection type''' ==

To Remove a Model inspection type from our list, select the Model inspection type and click on the ''Delete ''button.

[[File:Ramit 5.png|600px|Ramit 5.png]]

We will get a dialog asking if we are sure we want to remove that Model inspection type and all the associated information. Press ''OK ''to confirm.

[[File:Ramit 6.png|600px|Ramit 6.png]]

 

 

== '''Search a Model inspection type''' ==

The search for a Model inspection type can be done using any field in it. Within the Model inspection types page, we go to the Search space, and left click on it. We directly write any word contained in any of the Model inspection type fields that we want to search for, and click on the ''Search ''icon or press the ''Enter key'' directly. Then the results that match the search criteria will be shown.

[[File:Ramit 7.png|RTENOTITLE]]

 

If we want to set our list back to the original state, left click on the reset icon.

[[File:Ramit 8.png|RTENOTITLE]]

 

 

== '''Edit a Model inspection type''' ==

To edit a Model inspection type, we select a Model inspection type from our list, and click the ''Edit ''button.

[[File:Ramit 9.png|600px|Ramit 9.png]]

 

 

Once the changes are done, we click on the Save changes button.

[[File:Ramit 10.png|600px|Ramit 10.png]]

 

A popup dialog will appear asking us if we want to save all the changes, press OK. The server will confirm if the changes have been saved correctly.

[[File:Ramit 11.png|RTENOTITLE]]

 

 

 

== '''Model inspection type display modes''' ==

=== '''Fullscreen''' ===

To access the fullscreen view of a Model inspection type, click on the button in the upper right corner ''Enter full screen mode''.

[[File:Ramit 12.png|600px|Ramit 12.png]]

 

To exit this fullscreen view mode, click on the ''Exit Full Screen Mode ''button.

[[File:Ramit 13.png|600px|Ramit 13.png]]

 

=== '''List View''' ===

If we want to see only the Model inspection type list without the information, we can close the information by clicking the ''Close column'' button.

[[File:Ramit 14.png|600px|Ramit 14.png]]

 

This will show us the list on fullscreen. To return to the previous mode, click one of the Model inspection type to see its detailed information.

[[File:Ramit 15.png|600px|Ramit 15.png]]

 

== '''Model inspection type tools''' ==

In the tools column, we will find an icon, which clicked will display the information option. By clicking here we will access the general information of that Model inspection type.

[[File:Ramit 16.png|RTENOTITLE]]

[[Category:Model inspection type]]

Model inspection type

2020-08-05T09:37:06Z

Imartin:

We access the '''Model Inspection type''' section through the''Camo'' button on our main page.

 

On the left we have a list with the model inspection type from our database. In the right section we see the detailed content of the selected model inspection type.

Model inspection type fields are:

*'''ID: '''Model inspection type identification automatically generated at creation.
*'''Name: '''Model inspection type name.
*'''Grouping:''' Model inspection type group on reports.

 

== '''Create a new ''''''Model inspection type''' ==

To create a new Model inspection type press the ''Add ''button.

[[File:Ramit 1.png|600px|Ramit 1.png]]

 

Then we press the ''Edit ''button.

[[File:Ramit 2.png|600px|Ramit 2.png]]

 

Fields will be enabled to fill the new entry. The ID field will be automatically generated for us when a new entry is saved.

To save a new entry, click on the ''Save Changes'' button.

[[File:Ramit 3.png|600px|Ramit 3.png]]

 

We get a new confirmation dialog asking us if we want to create a new Model inspection type. We click OK.

[[File:Ramit 4.png|RTENOTITLE]]

 

== '''Remove a ''''''Model inspection type''' ==

To Remove a Model inspection type from our list, select the Model inspection type and click on the ''Delete ''button.

[[File:Ramit 5.png|600px|Ramit 5.png]]

We will get a dialog asking if we are sure we want to remove that Model inspection type and all the associated information. Press ''OK ''to confirm.

[[File:Ramit 6.png|600px|Ramit 6.png]]

 

 

== '''Search a Model inspection type''' ==

The search for a Model inspection type can be done using any field in it. Within the Model inspection types page, we go to the Search space, and left click on it. We directly write any word contained in any of the Model inspection type fields that we want to search for, and click on the ''Search ''icon or press the ''Enter key'' directly. Then the results that match the search criteria will be shown.

[[File:Ramit 7.png|RTENOTITLE]]

 

If we want to set our list back to the original state, left click on the reset icon.

[[File:Ramit 8.png|RTENOTITLE]]

 

 

== '''Edit a Model inspection type''' ==

To edit a Model inspection type, we select a Model inspection type from our list, and click the ''Edit ''button.

[[File:Ramit 9.png|600px|Ramit 9.png]]

 

 

Once the changes are done, we click on the Save changes button.

[[File:Ramit 10.png|600px|Ramit 10.png]]

 

A popup dialog will appear asking us if we want to save all the changes, press OK. The server will confirm if the changes have been saved correctly.

[[File:Ramit 11.png|RTENOTITLE]]

 

 

 

== '''Model inspection type display modes''' ==

=== '''Fullscreen''' ===

To access the fullscreen view of a Model inspection type, click on the button in the upper right corner ''Enter full screen mode''.

[[File:Ramit 12.png|600px|Ramit 12.png]]

 

To exit this fullscreen view mode, click on the ''Exit Full Screen Mode ''button.

[[File:Ramit 13.png|600px|Ramit 13.png]]

 

=== '''List View''' ===

If we want to see only the Model inspection type list without the information, we can close the information by clicking the ''Close column'' button.

[[File:Ramit 14.png|600px|Ramit 14.png]]

 

This will show us the list on fullscreen. To return to the previous mode, click one of the Model inspection type to see its detailed information.

[[File:Ramit 15.png|600px|Ramit 15.png]]

 

== '''Model inspection type tools''' ==

In the tools column, we will find an icon, which clicked will display the information option. By clicking here we will access the general information of that Model inspection type.

[[File:Ramit 16.png|RTENOTITLE]]

[[Category:Model inspection type]]

Model inspection type

2020-08-05T09:36:19Z

Imartin:

We access the '''Model Inspection type''' section through the''Camo'' button on our main page.

 

On the left we have a list with the model inspection type from our database. In the right section we see the detailed content of the selected model inspection type.

Model inspection type fields are:

*'''ID: '''Model inspection type identification automatically generated at creation.
*'''Name: '''Model inspection type name.
*'''Grouping:''' Model inspection type group on reports.

 

== '''Create a new ''''''Model inspection type''' ==

To create a new Model inspection type press the ''Add ''button.

[[File:Ramit 1.png|600px|Ramit 1.png]]

 

Then we press the ''Edit ''button.

[[File:Ramit 2.png|600px|Ramit 2.png]]

 

Fields will be enabled to fill the new entry. The ID field will be automatically generated for us when a new entry is saved.

To save a new entry, click on the ''Save Changes'' button.

[[File:Ramit 3.png|600px|Ramit 3.png]]

 

We get a new confirmation dialog asking us if we want to create a new Model inspection type. We click OK.

[[File:Ramit 4.png|RTENOTITLE]]

 

== '''Remove a ''''''Model inspection type''' ==

To Remove a Model inspection type from our list, select the Model inspection type and click on the ''Delete ''button.

[[File:Ramit 5.png|600px|Ramit 5.png]]

We will get a dialog asking if we are sure we want to remove that Model inspection type and all the associated information. Press ''OK ''to confirm.

[[File:Ramit 6.png|600px|Ramit 6.png]]

 

 

== '''Search a Model inspection type''' ==

The search for a Model inspection type can be done using any field in it. Within the Model inspection types page, we go to the Search space, and left click on it. We directly write any word contained in any of the Model inspection type fields that we want to search for, and click on the ''Search ''icon or press the ''Enter key'' directly. Then the results that match the search criteria will be shown.

[[File:Ramit 7.png|RTENOTITLE]]

 

If we want to set our list back to the original state, left click on the reset icon.

[[File:Ramit 8.png|RTENOTITLE]]

 

 

== '''Edit a Model inspection type''' ==

To edit a Model inspection type, we select a Model inspection type from our list, and click the ''Edit ''button.

[[File:Ramit 9.png|600px|Ramit 9.png]]

 

 

Once the changes are done, we click on the Save changes button.

[[File:Ramit 10.png|600px|Ramit 10.png]]

 

A popup dialog will appear asking us if we want to save all the changes, press OK. The server will confirm if the changes have been saved correctly.

[[File:Ramit 11.png|RTENOTITLE]]

 

 

 

== '''Model inspection type display modes''' ==

=== '''Fullscreen''' ===

To access the fullscreen view of a Model inspection type, click on the button in the upper right corner ''Enter full screen mode''.

[[File:Ramit 12.png|600px|Ramit 12.png]]

 

To exit this fullscreen view mode, click on the ''Exit Full Screen Mode ''button.

[[File:Ramit 13.png|600px|Ramit 13.png]]

 

=== '''List View''' ===

If we want to see only the Model inspection type list without the information, we can close the information by clicking the ''Close column'' button.

[[File:Ramit 14.png|600px|Ramit 14.png]]

 

This will show us the list on fullscreen. To return to the previous mode, click one of the Model inspection type to see its detailed information.

[[File:Ramit 15.png|600px|Ramit 15.png]]

 

== '''Model inspection type tools''' ==

In the tools column, we will find an icon, which clicked will display the information option. By clicking here we will access the general information of that Model inspection type.

[[File:Ramit 16.png|RTENOTITLE]]

[[Category:Model inspection type]]

Model inspection type

2020-08-05T09:32:51Z

Imartin:

We access the '''Model Inspection type''' section through the''Camo'' button on our main page.

 

On the left we have a list with the model inspection type from our database. In the right section we see the detailed content of the selected model inspection type.

Model inspection type fields are:

*'''ID: '''Model inspection type identification automatically generated at creation.
*'''Name: '''Model inspection type name.
*'''Grouping:''' Model inspection type group on reports.

 

== '''Create a new ''''''Model inspection type''' ==

To create a new Model inspection type press the ''Add ''button.

[[File:Ramit 1.png|600px|Ramit 1.png]]

 

Then we press the ''Edit ''button.

[[File:Ramit 2.png|600px|Ramit 2.png]]

 

Fields will be enabled to fill the new entry. The ID field will be automatically generated for us when a new entry is saved.

To save a new entry, click on the ''Save Changes'' button.

[[File:Ramit 3.png|600px|Ramit 3.png]]

 

We get a new confirmation dialog asking us if we want to create a new address. We click OK.

[[File:Ramit 4.png|RTENOTITLE]]

 

== '''Remove an Address''' ==

To Remove an Address from our list, select the Address and click on the ''Delete ''button.

[[File:Ramit 5.png|600px|Ramit 5.png]]

We will get a dialog asking if we are sure we want to remove that Address and all the associated information. Press ''OK ''to confirm.

[[File:Ramit 6.png|600px|Ramit 6.png]]

 

 

== '''Search an Address''' ==

The search for an address can be done using any field in it. Within the Addresses page, we go to the Search space, and left click on it. We directly write any word contained in any of the Address fields that we want to search for, and click on the ''Search ''icon or press the ''Enter key'' directly. Then the results that match the search criteria will be shown.

[[File:Ramit 7.png|RTENOTITLE]]

 

If we want to set our list back to the original state, left click on the reset icon.

[[File:Ramit 8.png|RTENOTITLE]]

 

 

== '''Edit an Address''' ==

To edit an Address, we select an address from our list, and click the ''Edit ''button.

[[File:Ramit 9.png|600px|Ramit 9.png]]

 

 

Once the changes are done, we click on the Save changes button.

[[File:Ramit 10.png|600px|Ramit 10.png]]

 

A popup dialog will appear asking us if we want to save all the changes, press OK. The server will confirm if the changes have been saved correctly.

[[File:Ramit 11.png|RTENOTITLE]]

 

 

 

== '''Addresses display modes''' ==

=== '''Fullscreen''' ===

To access the fullscreen view of an Address, click on the button in the upper right corner ''Enter full screen mode''.

[[File:Ramit 12.png|600px|Ramit 12.png]]

 

To exit this fullscreen view mode, click on the ''Exit Full Screen Mode ''button.

[[File:Ramit 13.png|600px|Ramit 13.png]]

 

=== '''List View''' ===

If we want to see only the Address list without the information, we can close the information by clicking the''Close column'' button.

[[File:Ramit 14.png|600px|Ramit 14.png]]

 

This will show us the list on fullscreen. To return to the previous mode, click one of the addresses to see its detailed information.

[[File:Ramit 15.png|600px|Ramit 15.png]]

 

== '''Address tools''' ==

In the tools column, we will find an icon, which clicked will display the information option. By clicking here we will access the general information of that Address.

[[File:Ramit 16.png|RTENOTITLE]]

[[Category:Model inspection type]]

File:Ramit 16.png

2020-08-05T09:26:33Z

Imartin:

File:Ramit 15.png

2020-08-05T09:26:23Z

Imartin:

File:Ramit 14.png

2020-08-05T09:26:13Z

Imartin:

File:Ramit 13.png

2020-08-05T09:26:03Z

Imartin:

File:Ramit 12.png

2020-08-05T09:25:51Z

Imartin:

File:Ramit 11.png

2020-08-05T09:25:41Z

Imartin:

File:Ramit 10.png

2020-08-05T09:25:31Z

Imartin:

File:Ramit 9.png

2020-08-05T09:25:21Z

Imartin:

File:Ramit 8.png

2020-08-05T09:25:11Z

Imartin:

File:Ramit 7.png

2020-08-05T09:25:00Z

Imartin:

File:Ramit 6.png

2020-08-05T09:24:49Z

Imartin:

File:Ramit 5.png

2020-08-05T09:24:39Z

Imartin:

File:Ramit 4.png

2020-08-05T09:24:30Z

Imartin:

File:Ramit 3.png

2020-08-05T09:24:20Z

Imartin:

File:Ramit 2.png

2020-08-05T09:24:10Z

Imartin:

File:Ramit 1.png

2020-08-05T09:23:45Z

Imartin: